3D Modeling of the Thermal Transfer through Precast Buildings Envelopes

S. Berrabah, M. Ould Moussa, M. Bakhouya

Energies, 2021, 14(13), 3751

A General Mechano-Pharmaco-Biological Model for Bone Remodeling Including Cortisol Variation

R. Ben Kahla, A. Barkaoui, M. Chafra, João Manuel R. S. Tavares

Mathematics, 2021, 9(12), 1401

New developments of the Gas Research Institute method for the permeability measurement of porous media

Y. Jannot, A. Degiovanni, C. Moyne, D. Lasseux

Review of Scientific Instruments, 92, 065102 (2021)

Conceptual context of tilted wick type solar stills: A productivity study on augmentation of parameters

G.Maheswaran, R. Ravi, R. Maheswar, K. Shanmugasundaram, K. Padmanathane, U. Subramaniyan, S. Alavandar, R.Ganesh, V. Manikandan

Solar Energy, vol. 221, June 2021, Pages 348-374

Energy performance of an unmixed anaerobic digester with submerged solid waste: Effects of temperature distribution

M. El Ibrahimi, I. Khay, A. El Maakoul, M. Bakhouya

Energy, vol. 231, 15 September 2021, 120926

Towards an IoT/Big-Data Platform for Data Measurements, Collection and Processing in Micro-grid Systems

A. Elmouatamid, Y. Alidrissi, R. Ouladsine, M. Bakhouya, N. Elkamoun, M. Khaidar, K. Zine-Dine

ICDTA 2021: Digital Technologies and Applications, p. 279-289

An Investigation of Heat Transfer Performance in an Agitated Vessel

M. Mahir, A. El Maakoul, I. Khay, S. Saadeddine, M. Bakhouya

Processes, 2021, 9(3), 468

Life-cycle assessment of gravity energy storage systems for large-scale application

A. Berrada, A. Emrani, A. Ameur

Journal of Energy Storage, vol.40, August 2021, 102825

Modeling and Performance Evaluation of the Dynamic Behavior of Gravity Energy Storage with a Wire Rope Hoisting System

A. Emrani, A. Berrada, M. Bakhouya

Journal of Energy Storage, vol. 33, January 2021, 102154

Pairwise quantum correlations in four-level quantum dot systems

S. Abaach, M. El Baz, M. Faqir

Physics Letters, Section A: General, Atomic and Solid State Physics, 391

An Energy Management Strategy for DC Microgrids with PV/Battery Systems

Y. Alidrissi, R. Ouladsine, A. Elmouatamid, M. Bakhouya

Journal of Electrical Engineering and Technology, 16, p. 1285–1296

Review on the use of medical imaging in orthopedic biomechanics: finite element studies

A. Barkaoui, I. Ait Oumghar, R. Ben Kahla

Computer Methods in Biomechanics and Biomedical Engineering: Imaging and Visualization

Electrodeposition route to synthesize nanocrystalline MnPO4.H2O thin films

S. Bououd, S. El-Aggadi, G. Kaichouh, K. Bouziane, A. El-Hourch, K. El-Kacemi, A. Guessous

Electrochimica Acta, vol. 370, 137670

Effect of Greenhouse Design Parameters on the Heating and Cooling Requirement of Greenhouses in Moroccan Climatic Conditions

N. Choab, A. Allouhi, A. El Maakoul, T. Kousksou, S. Saadeddine, A. Jamil

IEEE Access 9: 2986‑3003

A study of structural, magnetic and magnetocaloric properties of (1−x)La0.6Ca0.4MnO3/xMn2O3 composite materials

A. El Boukili, O. Mounkachi, M. Hamedoun, P. Lachkar, E. K. Hlil, A. Benyoussef, M. Balli, H. Ez-Zahraouy

Journal of Alloys and Compounds, 859

Food waste treatment through anaerobic co-digestion: Effects of mixing intensity on the thermohydraulic performance and methane production of a liquid recirculation digester

M. El Ibrahimi, I. Khay, A. El Maakoul, M. Bakhouya

Process Safety and Environmental Protection, 147: 1171‑84

Review of Control and Energy Management Approaches in Micro-Grid Systems

A. Elmouatamid, R. Ouladsine, M. Bakhouya, N. El Kamoun, M. Khaidar, K. Zine-Dine

Energies, 14(1), 168

Modeling and Performance Evaluation of the Dynamic Behavior of Gravity Energy Storage with a Wire Rope Hoisting System

A. Emrani, A. Berrada, M. Bakhouya

Journal of Energy Storage, 33, 102154

Prediction of particle deposition efficiency in a 90° turbulent bend pipe flow - A numerical study

F. Z. Erraghroughi, K. Feddi, A. El Maakoul, A. Bah, A. Ben Abdellah

Lecture Notes in Electrical Engineering 681: 809‑17.

Revisiting the magnetic and magnetocaloric properties of bulk gadolinium: A combined DFT and Monte Carlo simulations

R. Essajai, N. Ennassiri, M. Balli, M. Zidane, E. Salmani, O. Mounkachi, M. Rouchdi, A. Abbassi, H. Ez-Zahraouy, A. Mzerd, N. Hassanain

Physica Scripta, 96(1)

Finite element study of mixed fracture: Velocity-dependent insertion of pointed blades into soft material

M. Gzaiel, E. Triki, A. Barkaoui, M. Chafra

International Journal of Applied Mechanics

Apparent thermal conductivity measurement of anisotropic insulating materials at high temperature by the parallel hot-wire method

Y. Jannot, A. Degiovanni, V. Schick, J. Meulemans

International Journal of Thermal Sciences, 160

Evaluating barriers and solutions for social sustainability adoption in multi-tier supply chains

S.A.R Khan, K. Zkik, A. Belhadi, S.S. Kamble

International Journal of Production Research

Performance characterization of a direct evaporative cooling pad based on pottery material

A. Laknizi, A. Ben Abdellah, M. Faqir, E. Essadiqi, S. Dhimdi

International Journal of Sustainable Engineering, 14(1): 46‑56

Application of Taguchi and ANOVA methods in the optimisation of a direct evaporative cooling pad

A. Laknizi, A. Ben Abdellah, M. Mahdaoui, K. Anoune

International Journal of Sustainable Engineering

Electromagnetic-based wireless nano-sensors network: Architectures and applications

A. Oukhatar, M. Bakhouya, D.E. Ouadghiri

Journal of Communications, 16(1): 8‑19

Sewage sludge valorization in fired clay bricks: Physical properties and radiological assessment

I. Rhouch, S. Ouakkas, A. Laamyem, E. Essadiqi, M. Faqir

Journal of Hazardous, Toxic, and Radioactive Waste, 25(1)

Double Diffusive Mixed Convection with Thermodiffusion Effect in a Driven Cavity by Lattice Boltzmann Method

S. Bettaibi, O. Jellouli

Cellular Automata. ACRI 2020. Lecture Notes in Computer Science, vol 12599. Springer, Cham

Quantum correlations dynamics in two coupled semiconductor InAs quantum dots

H. Ait Mansour, F-Z Siyouri, M. Faqir, M. El Baz

Physica Scripta, 95, no. 9 (September 2020)

Towards a mathematical modeling of diseases’ impact on bone remodeling: Technical review

I. Ait Oumghar, A. Barkaoui, P. Chabrand

Frontiers in Bioengineering and Biotechnology, 8, 1236

Very short-term power forecasting of high concentrator photovoltaic power facility by implementing artificial neural network

Y. I. Alamin, M.K. Anaty, J.D.Á. Hervás, K. Bouziane, M.P. García, R. Yaagoubi, M. Del Mar Castilla, M. Belkasmi, M. Aggour

Energies 13, no. 13 (2020)

Aerodynamics of symmetric permeable airfoils and wings: CFD simulation

M. Aldheeb, W. Asrar, A. A. Omar, A. Altaf, E. Sulaeman

Progress in Computational Fluid Dynamics, an International Journal, 20(6), 349-362

Effect of a Directionally Porous Wing Tip on Tip Vortex

Aldheeb, M., W. Asrar, A. Omar, A. Altaf, E. Sulaeman

Journal of Applied Fluid Mechanics, 13, no. 2 (March 2020): 651‑65

Optimization and techno-economic analysis of photovoltaic-wind-battery based hybrid system

K. Anoune, M. Ghazi, M. Bouya, A. Laknizi, M. Ghazouani, A. B. Abdellah, A. Astito

Journal of Energy Storage, 32 (2020)

Cloud computing, IoT, and big data: Technologies and applications

Bakhouya, M., M. Zbakh, M. Essaaidi, P. Manneback

Concurrency Computation, 32, no. 17 (2020)

Strong conventional and rotating magnetocaloric effects in TbV O 4 crystals over a wide cryogenic temperature range

M. Balli, S. Mansouri, D. Z. Dimitrov, P. Fournier, S. Jandl, J. Y. Juang

Physical Review Materials, 4(11), 114411

Enlarging the magnetocaloric operating window of the Dy2NiMnO6 double perovskite by lanthanum doping

M. Balli, S. Mansouri, P. Fournier, S. Jandl, K. D. Truong, S. Khadechi-Haj Khlifa, P. de Rango, D. Fruchart, A. Kedous-Lebouc

Journal of Physics D: Applied Physics, 53, no. 9

The Integrated Effect of Big Data Analytics, Lean Six Sigma and Green Manufacturing on the Environmental Performance of Manufacturing Companies: The Case of North Africa

A. Belhadi, S.S. Kamble, K. Zkik, A. Cherrafi, F.E. Touriki

Journal of Cleaner Production, 252 (2020)

Towards a real-time predictive management approach of indoor air quality in energy-efficient buildings

A. Berouine, R. Ouladsine, M. Bakhouya, M. Essaaidi

Energies, 13, no. 12 (2020)

Towards a thermo-mechanical characterization approach of buildings’ envelope

S. Berrabah, M. Ould Moussa, M. Bakhouya

Energy Reports, 6, no. 1 (February 2020): 240‑45

Effect of Lattice Deformation on Electronic and Optical Properties of CuGaSe2: Ab-Initio Calculations

M. Bikerouin, M. Balli, M. Farkous, M. El-Yadri, F. Dujardin, A. B. Abdellah, E. Feddi, J. D. Correa, M. E. Mora-Ramos

Thin Solid Films, 696 (2020)

A Planar Dual-Band UHF RFID Tag for Metallic Items

H. Bouazza, A. Lazaro, M. Bouya, A. Hadjoudja

Radioengineering, 29(3), 505

Evaluation of the Effect of Contact and Friction on Deep Drawing Formability Analysis for Lightweight Aluminum Lithium Alloy Using Cylindrical Cup

K. Bouchaâla, M. F. Ghanameh, M. Faqir, M. Mada, E. Essadiqi

Procedia Manufacturing, 46, 623-629

Numerical Prediction of Thickness Influence on the Aircraft Wing Design

K. Bouchaâla, I. Driouch, M. Faqir, M. F. Ghanameh, H. Chouiyakh, E. Essadiqi

Advances in Intelligent Systems and Computing, 1104 AISC (2020): 475‑83

Investigation of Contact Impact in Deep Drawing for AA2198 Al-Li Sheet Using ABAQUS/Explicit

Bouchaâla, K., M.F. Ghanameh, M. Faqir, M. Mada, E. Essadiqi

Advances in Intelligent Systems and Computing, 1104 AISC (2020): 411‑20.

Engineering the magnetocaloric properties of PrVO3 epitaxial oxide thin films by strain effects

H. Bouhani, A. Endichi, D. Kumar, O. Copie, H. Zaari, A. David, A. Fouchet, W. Prellier, O. Mounkachi, M. Balli, A. Benyoussef, A. El Kenz, S. Mangin

Applied Physics Letters, 117, no. 7 (17 August 2020)

Online Battery State-of-Charge Estimation Methods in Micro-Grid Systems

S. Boulmrharj, R. Ouladsine, Y. NaitMalek, M. Bakhouya, K. Zine-dine, M. Khaidar, M. Siniti

Journal of Energy Storage, 30 (2020)

Modeling and Performance Analysis of a Grid-connected Polycrystalline Silicon Photovoltaic System under the Maritime Climate of El Jadida in Morocco

S. Boulmrharj, M. El Ibrahimi, A. Louardi, N. Aarich, A. Bennouna, M. Bakhouya, M. Raoufi, M. Monkade, M. Zehaf, M. Khaidar

International Journal of Renewable Energy Research, 10, no. 2 (June 2020): 791‑802.

Performance Assessment of a Hybrid System with Hydrogen Storage and Fuel Cell for Cogeneration in Buildings

S. Boulmrharj, M. Khaidar, M. Bakhouya, R. Ouladsine, M. Siniti, K. Zine-dine

Sustainability, 12, no. 12 (June 2020)

Towards performance assessment of fuel cell integration into buildings

S. Boulmrharj, M. Khaidar, M. Siniti, M. Bakhouya, K. Zine-dine

Energy Reports, 6, no. 1 (February 2020): 288‑93

Analysis of the magnetic and magnetocaloric properties of ALaFeMnO(6) (A=Sr, Ba, and Ca) double perovskites

N. Brahiti, M. Abbasi Eskandari, M. Balli, C. Gauvin-Ndiaye, R. Nourafkan, A-M S. Tremblay, P. Fournier

Journal of Applied Physics, 127, no. 11 (21 March 2020)

Analysis of the non-linearity of the heat transfer equation in case of a time-dependent heat source: application to the 3 omega method

T. Ding, Y. Jannot, V. Schick, A. Degiovanni

Journal of Engineering Mathematics, 121, no. 1 (April 2020): 85‑99

Numerical modeling of the size effect in CdSe/ZnS and InP/ZnS-based Intermediate Band Solar Cells

A. El Aouami, K. Feddi, M. Courel, F. Dujardin, D. Laroze, L. M. Pérez, E. M. Feddi

Physica Scripta

Linear and nonlinear optical properties of a single dopant in GaN conical quantum dot with spherical cap

A. El Aouami, M. Bikerouin, K. Feddi, N. Aghoutane, M. El-Yadri, E. Feddi, F. Dujardin, A. Radu, R. L. Restrepo, J. A. Vinasco, A. L. Morales, C. A. Duque, M. E. Mora-Ramos

Philosophical Magazine, 100, no. 19 (2020): 2503‑23

Internal polarization electric field effects on the efficiency of InN/InxGa1-xN multiple quantum dot solar cells

A. El Aouami, M. Bikerouin, M. El-Yadri, E. Feddi, F. Dujardin, M. Courel, B. Chouchen, M. H. Gazzah, H. Belmabrouk

Solar Energy, 201 (1 May 2020): 339‑47

Design and numerical investigations of natural convection heat transfer of a new rippling fin shape

I. El Ghandouri, A. El Maakoul, S. Saadeddine, M. Meziane

Applied Thermal Engineering, 178 (2020)

Transient linear analytical heat transfer model for a building, validation with a non-linear coupled finite volume code

A. El Maakoul, A. Degiovanni, Z. Bouhssine

Thermal Science and Engineering Progress, 20, 100756

Performance enhancement of finned annulus using surface interruptions in double-pipe heat exchangers

A. El Maakoul, K. Feddi, S. Saadeddine, A. Ben Abdellah, M. El Metoui

Energy Conversion and Management, 210 (15 April 2020)

A platform architecture for occupancy detection using stream processing and machine learning approaches

H. Elkhoukhi, Y. NaitMalek, M. Bakhouya, A. Berouine, A. Kharbouch, F. Lachhab, M. Hanifi, D. El Ouadghiri, M. Essaaidi

Concurrency Computation, 32, no. 17 (2020)

MAPCAST: an Adaptive Control Approach using Predictive Analytics for Energy Balance in Micro-Grid Systems

A. Elmouatamid, R. Ouladsine, M. Bakhouya, N. El Kamoun, K. Zine-Dine, M. Khaidar

International Journal of Renewable Energy Research, 10, no. 2 (June 2020): 945‑54

Electronic and magnetic properties of the multiferroic TbMn2O5

A. Endichi, H. Bouhani, H. Zaari, M. Balli, O. Mounkachi, A. El Kenz, A. Benyoussef, S. Mangin

Applied Physics A-Materials Science & Processing, 126, no. 6 (12 May 2020)

Strain Effects on the Electronic and Optical Properties of Van Der Waals Heterostructure MoS2/WS2: A First-Principles Study

M. Farkous, M. Bikerouin, D. V. Thuan, Y. Benhouria, M. El-Yadri, E. Feddi, H. Erguig, F. Dujardin, C. V. Nguyen, N. V. Hieu, H. D. Bui, N. N. Hieu, H. V. Phuc

Physica E: Low-Dimensional Systems and Nanostructures, 116 (2020)

Geometrical confinement effects on fundamental thermal properties of rutile and anatase TiO2 cylindrical and tubular nanostructures

K. Feddi, M. Kria, M. El-Yadri, F. F. Mbognou, G. Long, A. Tiutiunnyk, E. Feddi

Physica Scripta, 95(10), 105706

A study of magnetic and magnetocaloric properties of 0.95 (La0.45Nd0.25Sr0.3MnO3)/0.05CuO composites prepared by spray drying

L. Fkhar, A. Mahmoud, F. Boschini, A. Schrijnemakers, K. El Maalam, M. Hamedoun, A. Benyoussef, E. K. Hlil, M. Ait Ali, M. Balli, O. Mounkachi

Inorganic Chemistry Communications, 119 (2020)

Mobile application and Wi-Fi modules for smart home control

M. Fongbedji, N. Krami, M. Bouya

2020 IEEE 2nd International Conference on Electronics, Control, Optimization and Computer Science, ICECOCS 2020

Thermal energy management optimization of solar thermal energy system based on small parabolic trough collectors for bitumen maintaining on heat process

M. Ghazouani, M. Bouya, M. Benaissa, K. Anoune, M. Ghazi

Solar Energy, 211, 1403-1421

Thermo-Economic and Exergy Analysis and Optimization of Small PTC Collectors for Solar Heat Integration in Industrial Processes

M. Ghazouani, M. Bouya, M. Benaissa

Renewable Energy, 152 (2020) : 984‑98

An atomistic gateway into capturing twin nucleation in crystal plasticity

D. Giri, H. ElKadiri, K. R. Limmer, C. D. Barrett

Philosophical Magazine Letters 100, no. 8 (2020): 375‑85

Metal-non-metal transition of expanded liquid Caesium

B. Grosdidier, N. Sulaiman, S. M. Osman, A. Ben Abdellah

Philosophical Magazine, s. d.

Improvements of Centroid Localization Algorithm for Wireless Sensor Networks

A. Hadir, K. Zine-Dine, M. Bakhouya

Proceedings of 2020 5th International Conference on Cloud Computing and Artificial Intelligence: Technologies and Applications, CloudTech 2020

Thermal Diffusivity Measurement of Insulating Materials at High Temperature with a Four-Layer (4L) Method

Y. Jannot, A. Degiovanni, V. Schick, J. Meulemans

International Journal of Thermal Sciences, 150 (2020)

Computational approach of the cortical bone mechanical behavior based on an elastic viscoplastic damageable constitutive model

T. Kraiem, A. Barkaoui, T. Merzouki, M. Chafra

International Journal of Applied Mechanics, 12(07), 2050081

Thermodynamic properties of SnO2/GaAs core/shell nanofiber

M. Kria, K. Feddi, N. Aghoutane, M. El-Yadri, L. M. Pérez, D. Laroze, F. Dujardin, E. Feddi

Physica A: Statistical Mechanics and its Applications, 560 (2020)

A real-time approach for thermal comfort management in electric vehicles

A. Lahlou, F. Ossart, E. Boudard, F. Roy, M. Bakhouya

Energies 13, no. 15 (2020)

Optimal Management of Thermal Comfort and Driving Range in Electric Vehicles

A. Lahlou F. Ossart, E. Boudard, F. Roy, M. Bakhouya

Energies, 2020, vol. 13, no. 17, p. 4471

Phonons correction of the energy and photoionization cross section in polar semiconductors and hollow nanoparticles

S. M’Zerd, A. Talbi, M. Bikerouin, M. El Haouari, N. Aghoutane, M. El-Yadri, Z.-H. Zhang, J.-H. Yuan, M. Sadoqi, G. Long, E. Feddi

Journal of Materials Research, 2020

Posterior Dynamic Topping-off Fusion Stabilization System in Lumbosacral Spine: A Review of Different Instrumentation Techniques

M. Mesbah, A. Barkaoui, H. Chiali, M. Bendoukha

Series on Biomechanics 34, no. 1 (2020): 41‑47

Biomechanical investigation of the effect of pedicle-based hybrid stabilization constructs: A finite element study

M. Mesbah, A. Barkaoui

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 234, no. 9 (2020): 931‑41

CFD analysis of the effects of multiple semicircular blades on Savonius wind turbine performance

M. Meziane, M. Faqir, E. Essadiqi, M. F. Ghanameh

International Journal of Renewable Energy Research (IJRER), 10(3), 1316-1326

Numerical Investigation of Hybrid Darrieus-Savonius Wind Turbine Performance

M. Meziane, M. Faqir, E. Essadiqi, M. F. Ghanameh

Advances in Intelligent Systems and Computing, 1104 AISC (2020): 466‑74

Experimental and Numerical Performances Analysis of a Small Three Blades Wind Turbine

M. Ould Moussa

Energy, 203 (2020)

Characterization and Modeling of 101¯2 Twin Banding in Magnesium

Y. R. Paudel, J. Indeck, K. Hazeli, M. W. Priddy, K. Inal, H. Rhee, C. D. Barrett, W. R. Whittington, K. R. Limmer, H. El Kadiri

Acta Materialia, 183 (2020): 438‑51

Full-Field Crystal Plasticity Modeling of 101¯2 Twin Nucleation

Y. R. Paudel, C. D. Barrett, H. El Kadiri

Minerals, Metals and Materials Series, 2020, 141‑46

Impact of Energy Storage System on Frequency Control of an Islanded Microgrid

R. Rabeh, M. Ferfral, A. Ezbakhe

5th International Conference on Renewable Energies for Developing Countries (REDEC), (pp. 1-6), IEEE (2020)

In Situ Characterization of the Effect of Twin-Microstructure Interactions on 10-12 Tension and 10-11 Contraction Twin Nucleation, Growth and Damage in Magnesium

W. D. Russell, N. R. Bratton, Y. Paudel, R. D. Moser, Z. B. McClelland, C. D. Barrett, H. El Kadiri

Metals, 10(11), 1403

An enhanced flooding algorithm for wireless nanosensor networks

O. Yalgashev, M. Bakhouya, J. Gaber

International Conference on Information Science and Communications Technologies, ICISCT 2020

Numerical investigation on aerodynamic performance of bird’s airfoils

A. Omar, R. Rahuma, A. Emhemmed

Journal of Aerospace Technology and Management, 12: e4620

Influence of the porous transport layer properties on the mass and charge transfer in a segmented PEM electrolyzer

J. P. Restrepo, R. Bligny, J. Dillet, S. Didierjean, D. Stemmelen, C. Moyne, A. Degiovanni, G. Maranzana

International Journal of Hydrogen Energy, February 2020

Forecast modeling and performance assessment of solar PV systems

A. Arechkik, A. Berrada, K. Loudiyi, M. Aggour

Journal of cleaner production, 267 (2020), 122167

Numerical simulation of apparent density evolution of trabecular bone under fatigue loading: effect of bone initial properties

A. Barkaoui, R. Ben Kahla, T. Merzouki, R. Hambli

Journal of Mechanics in Medicine and Biology, vol. 19, no. 5, August 2019

Optimisation and economic modeling of micro hydropower plant integrated in water distribution system

A. Berrada, Z. Bouhssine, A. Arechkik

Journal of Cleaner Production, vol. 232, p. 877‑887, September 2019

Water Productivity: Revisiting the Concepts in Light of Water, Energy and Food Nexus an Overview of Question 60, 23rd Congress of ICID

A. Debbarh

Irrigation and Drainage, vol. 68, no 1, p. 20‑30, 2019

Impact of heavy hole levels on the photovoltaic conversion efficiency of InxGa1-xN/InN quantum dot intermediate band solar cells

A. El Aouami, K. Feddi, M. El Haouari, M. El Yadri, N. Ben Afkir, M. Zazoui, E. Feddi, C. A. Duque, F. Dujardin

Superlattices and Microstructures, vol. 129, p. 202‑211, May 2019

Impedance identification in a hydrodynamically developed flow

A. El Maakoul, A. Degiovanni

International Journal of Thermal Sciences, vol. 135, p. 148‑162, 2019

Modeling of thermal contacts with heat generation: Application to electrothermal problems

A. El Maakoul, B. Remy, A. Degiovanni

International Journal of Heat and Mass Transfer, vol. 140, p. 293‑302, September 2019

A general approach to solve heat conduction problems with internal heat sources using resistance and quadrupole concepts

A. El Maakoul, C. Moyne, A. Degiovanni

International Journal of Heat and Mass Transfer, vol. 129, p. 793‑800, February 2019

An energy management platform for micro-grid systems using Internet of Things and Big-data technologies

A. Elmouatamid, Y. NaitMalek, M. Bakhouya, R. Ouladsine, N. Elkamoun, K. Zine-Dine, M. Khaidar

Proceedings of the Institution of Mechanical Engineers Part I-Journal of Systems and Control Engineering, vol. 233, no. 7, SI, p. 904‑917, August 2019

A Model Predictive Control Approach for Energy Management in Micro-Grid Systems

A. Elmouatamid, R. Ouladsine, M. Bakhouya, N. El Kamoun, K. Zine-Dine, M. Khaidar

International Conference on Smart Energy Systems and Technologies (SEST), 2019, p. 1‑6

Novel localisation algorithms in wireless sensor networks

A. Hadir, K. Zine-Dine, M. Bakhouya, J. E. Kafi

International Journal of Wireless and Mobile Computing, vol. 16, no. 1, p. 80‑96, 2019

A Steady-state Method for the Estimation of the Thermal Conductivity of a Wire

A. Jagueneau, Y. Jannot, A. Degiovanni, T. Ding

International Journal of Heat and Technology, vol. 37, no. 1, p. 351‑356, March 2019

Performance analysis and optimal parameters of a direct evaporative pad cooling system under the climate conditions of Morocco

A. Laknizi, M. Mandaoui, A. Ben Abdellah, K. Anoune, M. Bakhouya, H. Ezbakhe

Case Studies in Thermal Engineering, vol. 13, March 2019

Adaptive alert content dissemination protocol inspired from volunteer’s dilemma game for Vehicular Ad-hoc Networks

A. Naja, M. Boulmalf, M. Essaaidi, O. A. Oualhaj

Vehicular Communications, vol. 19, October 2019

Analysis of renewable energy integration into the transmission network

A. Ameur, A. Berrada, K. Loudiyi, M. Aggour

The Electricity Journal, 32(10), 106676

Energy Consumption of Batch and Online Data Stream Learning Models for Smartphone-based Human Activity Recognition

I. Amezzane, A. Berrazzouk, Y. Fakhri, M. El Aroussi, M. Bakhouya

4th World Conference on Complex Systems (WCCS), (p. 1-5), IEEE, April 2019

Techno-economic investigation of solar-wind potential to power an industrial prototype using a hybrid renewable energy system

K. Anoune, M. Bouya, A. Laknizi, A. Ben Abdellah, A. Astito, M. Ghazouani

SN Applied Sciences, 1, no. 11, November 2019

A Fuzzy Logic-Based Approach for HVAC Systems Control

A. Berouine, E. Akssas, Y. Naitmalek, F. Lachhab, M. Bakhouya, R. Ouladsine, M. Essaaidi

6th International Conference on Control, Decision and Information Technologies (CoDIT) (p. 1510-1515), IEEE, April 2019

A model predictive approach for ventilation system control in energy efficient buildings

A. Berouine, R. Ouladsine, M. Bakhouya, F. Lachhab, M. Essaaidi

4th World Conference on Complex Systems (WCCS) (p. 1-6), IEEE, April 2019

Investigation of Friction Behavior of Aa2090 Al-Li Alloy in Cylindrical Deep Drawing Sheet Metal Using Finite Element

K. Bouchaâla, M. Faqir, M. F. Ghanameh, M. Mada, E. Essadiqi

International Journal of Mechanical and Production Engineering Research and Development 9, no. 6 (2019): 1035‑48

Prediction of the Impact of Friction’s Coefficient in Cylindrical Deep Drawing for AA2090 Al-Li Alloy Using FEM and Taguchi Approach

K. Bouchaâla, M. F. Ghanameh, M. Faqir, M. Mada, E. Essadiqi

IOP Conference Series: Materials Science and Engineering, Vol. 664. Institute of Physics Publishing, 2019

Numerical Investigation of Cooling Properties of La0.6Ca0.4MnO3 in an Active Magnetic Regenerator System

A. El Boukili, H. Ez-Zahraouy, M. Hamedoun, A. Benyoussef, M. Balli, O. Mounkachi

Refrigeration Science and Technology, August 2019:1829‑36. International Institute of Refrigeration, 2019

On the Use of Deep Learning Approaches for Occupancy Prediction in Energy Efficient Buildings

H. Elkhoukhi, M. Bakhouya, M. Hanifi, D. El Ouadghiri

Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019, édité par Zaz Y. El Hibaoui A. Essaaidi M. Institute of Electrical and Electronics Engineers Inc., 2019

A Control Strategy Based on Power Forecasting for Micro-Grid Systems

A. Elmouatamid, R. Ouladsine, M. Bakhouya, K. Zine-Dine, M. Khaidar

2019 IEEE International Smart Cities Conference (ISC2) (p. 735-740), IEEE, October 2019

Numerical Study of a Shock-Wave Boundary-Layer Interaction: Compression Ramp Flow-Fields

O. A. Elsayed

IOP Conference Series: Materials Science and Engineering, Vol. 664. Institute of Physics Publishing, 2019

A context-driven platform using Internet of things and data stream processing for heating, ventilation and air conditioning systems control

F. Lachhab, M. Bakhouya, R. Ouladsine, M. Essaaidi

Proceedings of the Institution of Mechanical Engineers Part I-Journal of Systems and Control Engineering, vol. 233, no. 7, SI, p. 877‑888, August 2019

Context-driven monitoring and control of buildings ventilation systems using big data and Internet of Things-based technologies

F. Lachhab, M. Bakhouya, R. Ouladsine, M. Essaaidi

Proceedings of the Institution of Mechanical Engineers Part I-Journal of Systems and Control Engineering, vol. 233, no 3, p. 276‑288, March 2019

Structure and Magnetic Properties of Bulk Synthesized Mn2− xFexP1− ySiy Compounds from Magnetization, 57Fe Mössbauer Spectroscopy, and Electronic Structure Calculations

D. Fruchart, S. Haj-Khlifa, P. de Rango, M. Balli, R. Zach, W. Chajec, J. Tobola

Crystals, 9(1), 37

Dual-band UHF RFID tag for metallic items

H. Bouazza, A. Lazaro, M. Bouya, A. Hadjoudja

2019 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC), 2019, p. 090‑092

Parameters Affecting UHF RFID Tag Performances

H. Bouazza, A. Lazaro, M. Bouya, A. Hadjoudja

2019 IEEE International Conference on RFID Technology and Applications (RFID-TA), 55‑57, 2019

On the origin of the giant magnetocaloric effect in HoMn2O5 single crystals: First principles study and Monte Carlo simulations

H. Bouhani, A. Endichi, H. Zaari, A. Benyoussef, M. Hamedoun, M. Balli, A. El Kenz, O. Mounkachi

Materials Chemistry and Physics, vol. 231, p. 366‑371, 2019

Heat treatment effect on mechanical properties of AISI 304 austenitic stainless steel

H. Essoussi, S. Elmouhri, S. Ettaqi, E. Essadiqi

12th International Conference Interdisciplinarity in Engineering (INTER-ENG 2018), 2019, vol. 32, p. 883‑888

Microstructure and mechanical performance of resistance spot welding of AISI 304 stainless steel and AISI 1000 series steel

H. Essoussi, S. Elmouhri, S. Ettaqi, E. Essadiqi

12th International Conference Interdisciplinarity in Engineering (INTER-ENG 2018), 2019, vol. 32, p. 872‑876

A Weighted Centroid Localization Algorithm for Wireless Sensor Networks

A. Hadir, K. Zine-Dine, M. Bakhouya

2019 International Conference on High Performance Computing & Simulation (HPCS) (p. 92-98), IEEE, July 2019

A comparative study of predictive approaches for load forecasting in smart buildings

S. Hadri, Y. Naitmalek, M. Najib, M. Bakhouya, Y. Fakhri, M. Elaroussi

Procedia Computer Science, 160, 173-180

Thermal Modeling of a Pilot-Scale Liquid Recirculation Anaerobic Digester

M. El Ibrahimi, I. Khay, A. El Maakoul, M. Bakhouya

Proceedings of 2019 7th International Renewable and Sustainable Energy Conference, IRSEC 2019, Institute of Electrical and Electronics Engineers Inc., 2019

Numerical and experimental study on the effect of cab-extender on the flow characteristics of a tractor-trailer

J. S. M. Ali, A. A. Omer, M. F. D. Nasikin

Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, vol. 53, no. 1, p. 61‑68, 2019

Friction behavior of aluminum-lithium sheet thought deep drawing analysis

K. Bouchaâla, M. Faqir, M. F. Ghanameh, M. Mada, E. H. Essadiqi

2019 International Conference of Computer Science and Renewable Energies (ICCSRE), 2019, p. 1‑5

IoT and Big Data Technologies for Monitoring and Processing Real-Time Healthcare Data

A. Kharbouch, Y. Naitmalek, H. Elkhoukhi, M. Bakhouya, V. De Florio, M. D. El Ouadghiri, S. Latre, C. Blondia

International Journal of Distributed Systems and Technologies, 10, no 4 (December 2019): 17‑30

Hydrothermal Synthesis and Characterization of Mn-Doped VO 2 Nanowires

G. Long, D. Matatov, A. Suissa, E. Feddi, M. E. Yadri, K. Feddi, M. Sadoqi

MRS Advances, 4(14), 829-836

Topological Monopoles in Quantum Antiferromagnets

M. Azzouz

Symmetry-Basel, vol. 11, no. 3, March 2019

Anaerobic co-digestion in a liquid recirculation pilot-scale reactor: Thermal and hydraulic study

M. El Ibrahimi, I. Khay, A. El Maakoul, M. Ould Moussa, A. Barkaoui, M. Bakhouya

Energy Reports, 2019

Finite element modeling of the puncture-cutting response of soft material by a pointed blade

M. Gzaiel, E. Triki, A. Barkaoui

Mechanics of Materials, vol. 136, September 2019

CFD Study of Unsteady Flow Through Savonius Wind Turbine Clusters

M. Meziane, E. Essadiqi, M. Faqir, M. F. Ghanameh

International Journal of Renewable Energy Research, vol. 9, no. 2, p. 657‑666, June 2019

On the alloying and strain effects of divacancy energy level in n-type Si1-xGex

M. Mamor, K. Bouziane, M. Maaza

Journal of Applied Physics, 126, no. 23, December 2019

Origin of the enhanced ferroelectricity in multiferroic SmM n 2 O 5

S. Mansouri, S. Jandl, M. Balli, P. Fournier, Y. Ishii, H. Kimura, M. Orlita, M. Chaker

Physical Review B, 2019, vol. 100, no 8, p. 085147

Finite element analysis of a patient-specific model of the lumbar spine behaviour

M. Mesbah, A. Barkaoui, H. Chiali

Series on Biomechanics, 2019

Review on greenhouse microclimate and application: Design parameters, thermal modeling and simulation, climate controlling technologies

N. Choab, A. Allouhi, A. El Maakoul, T. Kousksou, S. Saadeddine, A. Jamil

Solar Energy, vol. 191, p. 109‑137, 2019

On the Use of Machine Learning for State-of- Charge Forecasting in Electric Vehicles

Y. Naitmalek, M. Najib, M. Bakhouya, M. Essaaidi

5th IEEE International Smart Cities Conference, ISC2 2019, 408‑13, Institute of Electrical and Electronics Engineers Inc., 2019

Forecasting the state-of-charge of batteries in micro-grid systems

Y. Naitmalek, M. Najib, M. Bakhouya, M. Essaaidi

4th World Conference on Complex Systems (WCCS) (pp. 1-6). IEEE, April 2019

Battery Characterization and Dimensioning Approaches for Micro-Grid Systems

S. Boulmrharj, Y. NaitMalek, A. Elmouatamid, M. Bakhouya, R. Ouladsine, K. Zine-Dine, M. Khaidar, M. Siniti

Energies, vol. 12, no. 7, April 2019

Performance Analysis of a Grid-Connected PV Panels- Electrolyzer - Fuel Cell System for Cogeneration in Energy Efficient Buildings

S. Boulmrharj, M. Bakhouya, K. Zine-dine, M. Siniti, M. Khaidar

7th International Renewable and Sustainable Energy Conference (IRSEC), 1‑5, 2019

Real-time Control of Smart Grids using NI CompactRIO

S. Bourhnane, M. R. Abid, R. Lghoul, K. Zine-Dine, N. Elkamoun, M. Bakhouya, D. Benhaddou

International Conference on Wireless Technologies, Embedded and Intelligent Systems (WITS), 2019, p. 1‑6

An agency perspective for multi-mode project scheduling with time/cost trade-offs

T. Aouam, M. Vanhoucke

Computers & Operations Research, vol. 105, p. 167‑186, May 2019

Nanopyramid-based absorber to boost the efficiency of InGaN solar cells

W. El Huni, S. Karrakchou, Y. Halfaya, M. Arif, M. B. Jordan, R. Puybaret, T. Ayari, H. Ennakrachi, C. Bishop, S. Gautier, A. Ahaitouf, P. L. Voss, J. P. Salvestrini, A. Ougazzaden

Solar Energy, vol. 190, p. 93‑103, 2019

An improved model for the parallel hot wire: Application to thermal conductivity measurement of low density insulating materials at high temperature

Y. Jannot, A. Degiovanni

International Journal of Thermal Sciences, vol. 142, p. 379‑391, August 2019

A new method for measuring the thermal conductivity of small insulating samples

Y. Jannot, S. Schaefer, A. Degiovanni, J. Bianchin, V. Fierro, A. Celzard

Review of Scientific Instruments, vol. 90, no 5, May 2019

Secondary Frequency Control of an Islanded Microgrid by Combined GA-TLBO Algorithm

R. Rabeh, M. Ferfra, A. Ezbakhe

8th International Conference on Systems and Control (ICSC), 194-199

Secondary Control of Islanded Microgrids Using PI-Evolutionary Algorithms Under Uncertainties

R. Rabeh, M. Ferfra, A. Ezbakhe

International Journal of Renewable Energy Research (IJRER) 9 (4), 1827-1837, 2019

Forest Fire phenomena: Vulnerability and Control

O. Jellouli, A. Bernoussi, M. Amharref, M. Ouardouz

Advanced Intelligent Systems for Sustainable Development (AI2SD’2019), 08-11 July 2019 Marrakech, Morocco

Experimental Characterization of a Double-Effect Absorption Heat Pump-MED System Driven by Parabolic Trough Collectors

A. Chorak, P. Palenzuela, D.-C. Alarcon-Padilla, A. Ben Abdellah

6th International Renewable and Sustainable Energy Conference (IRSEC), 2018, p. 665‑672

Deployment and Experimental Evaluation of Micro-Grid Systems

A. Elmouatamid, M. Bakhouya, R. Ouladsine, N. El Kamoun, K. Zine-Dine, M. Khaidar, R. Abid

6th International Renewable and Sustainable Energy Conference (IRSEC), 2018, p. 1‑6

A Demand/Response Control Approach of PV-Grid System

A. Elmouatamid, Y. NaitMalek, R. Ouladsine, M. Bakhouya, K. Zine-dine, M. Khaidar, M. Elkamoun, R. Abid

5th International Conference on Control, Decision and Information Technologies, CoDIT’2018, Thessaloniki, Greece, p. 1-5, 2018, IEEE

Efficient Stacked Cylindrical Dielectric Resonator Antenna for Anticollision Short Range Radar at 79GHz

A. Haddad, M. Aoutoul, K. Rais, M. Faqir, M. Essaaidi, B. Lakssir, F. El Moukhtafi, R. Jouali

International Symposium on Advanced Electrical and Communication Technologies (ISAECT), 2018, p. 1‑4

Modeling and Performance Evaluation of an Air-Soil Exchange System in Energy Efficient Buildings

A. Kharbouch, A. El Maakoul, M. Bakhouya, D. El Ouadghiri

6th International Renewable and Sustainable Energy Conference (IRSEC), 2018, p. 1‑6

Modeling and thermal analysis of small scale desalination system using humidification- dehumidification process driven by solar energy

A. Laknizi, A. Fikri, I. Driouch, E. Essadiqi, M. Faqir, M. Faqir, M. Ghazi, M. Mada, A. Benabdellah

Proceedings of 2018 6th International Renewable and Sustainable Energy Conference, IRSEC 2018

Output Power Estimation of High Concentrator Photovoltaic using Radial Basis Function Neural Network

M. K. Anaty, Y. I. Alamin, M. P. García, R. Yaagoubi, J. D. Á . Hervás, M. Belkasmi, M. Aggour

6th International Renewable and Sustainable Energy Conference (IRSEC) (p. 1-6), IEEE, 2018, December

Sizing methods and optimization techniques for PV-wind based hybrid renewable energy system: A review

K. Anoune, M. Bouya, A. Astito, A. Ben Abdellah

Renewable and Sustainable Energy Reviews, 93, 652-673

Sizing a PV-Wind based hybrid system using deterministic approach

K. Anoune, A. Laknizi, M. Bouya, A. Astito, A. Ben Abdellah

Energy Conversion and Management, 169, 137-148

Energy performance and environmental impact of an earth-air heat exchanger for heating and cooling a poultry house

Azzeddine Laknizi, Mustapha Mahdaoui, Abdellatif Ben Abdellah, Kamal Anoune, Mohsine Bouya

Advanced Intelligent Systems for Sustainable Development (AI2SD’18), July 12-14, 2018 Tangier, Morocco

Age-related mechanical strength evolution of trabecular bone under fatigue damage for both genders: Fracture risk evaluation

R. Ben Kahla, A. Barkaoui, T. Merzouki

Journal of the Mechanical Behavior of Biomedical Materials, 2018

Towards a battery characterization methodology for performance evaluation of micro-grid systems

S. Boulmrharj, Y. NaitMalek, A. El Mouatamid, R. Ouladsine, M. Bakhouya, M. Ould Moussa, K. Zine-Dine, M. Khaidar, R. Abid

2018 International Conference on Smart Energy Systems and Technologies, SEST 2018 - Proceedings, 2018

Energetic evaluation of a double-effect LiBr-H2O absorption heat pump coupled to a multi-effect distillation plant at nominal and off-design conditions

A. Chorak, P. Palenzuela, D.-C. Alarcón-Padilla, A. Ben Abdellah

Applied Thermal Engineering, 2018

The effect of alloying elements on the stacking fault energy of a TWIP steel

H. Essoussi, S. Ettaqi, E. Essadiqi

Procedia Manufacturing, 2018

Performance Evaluation of Linked Stream Data Processing Engines for Situational Awareness Applications

F. Lachhab, M. Bakhouya, R. Ouladsine, M. Essaaidi

Concurrency and Computation: Practice and Experience, 30 (12), 2018

Towards an Intelligent Approach for Ventilation Systems Control using IoT and Big Data Technologies

F. Lachhab, M. Bakhouya, R. Ouladsine, M. Essaaidi

9th International Conference on Ambient Systems, Networks and Technologies (ANT 2018), Porto, Portugal, Procedia Computer Science, Elsevier, Volume 130, p. 926-931

Context-Driven Approach using IoT and Big Data Technologies for Controlling HVAC Systems

F. Lachhab, Y. Nait Malek, M. Bakhouya, R. Ouladsine, M. Essaaidi

5th International Conference on Control, Decision and Information Technologies, CoDIT’2018, Thessaloniki, Greece, p. 1-6, 2018

Optimal number of effects for multi effect evaporation seawater desalination process using solar thermal energy-plate evaporators

M. Ghazi, E. Essadiqi, M. Mada, M. Faqir, A. Ben Abdellah

International Journal on Energy Conversion, 2018

Design of high gain novel dielectric resonator antenna array for 24 GHz short range radar systems

A. Haddad, M. Aoutoul, K. Rais, M. Essaaidi, M. Faqir, M. Bouya

Advanced Electromagnetics, 2018

Numerical Study of Shell and Tube Heat Exchangers with Different Baffle Cuts

E. Ghandouri, A. E. Maakoul, M. Meziane, N. Choab, Y. Naim, S. Saadeddine

6th International Renewable and Sustainable Energy Conference (IRSEC), 2018, p. 1‑6

Filtration des eaux usées de la station de prétraitement de la ville d’El Jadida par des matrices à base de matières naturelles et de déchets industriels

A. Rhouch, A. Laamyem, A. Zradba, M. Monkade, M. Faqir

Eau, l’Industrie, les Nuisances, no. 413, p. 97‑102, 2018

Unraveling Recrystallization Mechanisms Governing Texture Development from Rare-Earth Element Additions to Magnesium

A. Imandoust, C. D. Barrett, T. Al-Samman, M. A. Tschopp, E. Essadiqi, N. Hort, H. El Kadiri

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2018

In-plane thermal diffusivity measurement of thin plates by the transient fin method

Y. Jannot, A. Degiovanni, A. Aubert, F. Lechleiter

Review of Scientific Instruments, 2018

Extension of the thermal porosimetry method to high gas pressure for nanoporosimetry estimation

Y. Jannot, A. Degiovanni, M. Camus

Review of Scientific Instruments, 89(4), 044904

Modeling of Anisotropy Influence on Thickness Distribution of Deep Drawing Sheet

K. Bouchaâla, M. F. Ghanameh, E. H. Essadiqi, M. Faqir, M. Meziane, M. Mada

Proceedings Of International Conference on Robotics, Control and Automation Engineering (RAE 2018) and International Conference on Advanced Mechanical and Electrical Engineering (AMEE 2018), 2018, p. 142‑146

Cross-Links Multiscale Effects on Bone Ultrastructure Biomechanical Behavior

T. Kraiem, A. Barkaoui, T. Merzouki, M. Chafra

Journal of Mechanics in Medicine and Biology, 2018

Energy Performance and Environmental Impact of an Active Domestic Solar Water Heater in Maghreb Arab Union Countries

A. Laknizi

International Journal of Renewable Energy Research (IJRER), 8(3), 1572-1579

Outdoor performance tests of a HCPV prototype

M. Belkasmi, K. Bouziane, M. Akherraz, M. Anaty, M. El Ouahabi, T. Sadiki, M. Faqir

International Journal on Energy Conversion, vol. 6, no. 4, p. 136‑143, 2018

Thermal analysis and optimization of mechanical vapour compression desalination process driven by renewable energy using genetic algorithm

M. Ghazi, M. Faqir, M. Mada, E. Essadiqi

Desalination and Water Treatment, vol. 135, p. 25‑46, December 2018

Radiological assessment of wastewater treatment processes based on the use of coal ashes as a filters

L. Taoufiq, A. Laamyem, A. Boukhair, E. Essediqi, M. Monkade, A. Zrabda

Journal of Radiation Research and Applied Sciences, vol. 11, p. 217-224

Estimating the Renewable Energy Potential in Morocco: Solar energy as a case study

G. Tazi, O. Jbaihi, A. Ghennioui, A. A. Merrouni, M. Bakkali

IOP Conference Series: Earth and Environmental Science, 2018

Experimental and simulation-based evaluation of a wind energy conversion system

R. Rabeh, M. Bakhouya, M. Ferfra, R. Ouladsine, A. Ezbakhe

Energy Procedia 153, 68-73, 2018

Advanced thermal impedance network for the heat diffusion with sources

A. Degiovanni, C. Pradere, E. Ruffio, J.-L. Battaglia

International Journal of Thermal Sciences, August 2018

A Novel Interconnection Technique Using Zero-Degree Phase Shifting Microstrip TL for RF QFN Package at S-Band

M. Aoutoul, A. Haddad, M. Essaaidi, M. Faqir

Progress In Electromagnetics Research, 67, 125-130

Experimental characterization of a multi-effect distillation system coupled to a flat plate solar collector field: Empirical correlations

A. Chorak, P. Palenzuela, D.-C. Alarcïn-Padilla, A. Ben Abdellah

Applied Thermal Engineering, 120, p. 298-313

Numerical design and investigation of heat transfer enhancement and performance for an annulus with continuous helical baffles in a double-pipe heat exchanger

A. El Maakoul, A. Laknizi, S. Saadeddine, A. Ben Abdellah, M. Meziane, M. El Metoui

Energy Conversion and Management, 2017

Numerical investigation of thermohydraulic performance of air to water double-pipe heat exchanger with helical fins

A. El Maakoul, M. El Metoui, A. Ben Abdellah, S. Saadeddine, M. Meziane

Applied Thermal Engineering, 127, p. 127-139

Modeling and Performance Evaluation of Photovoltaic Systems

A. El Mouatamid, R. Ouladsine, M. Bakhouya, V. Felix, N. Elkamoun, K. Zine-Dine, M. Khaidar, R. Abid

Proceedings of 2017 International Renewable and Sustainable Energy Conference, IRSEC 2017

Monitoring and Controlling Buildings Indoor Air Quality Using WSN-based technologies

F. Lachhab, M. Bakhouya, R. Ouladsine, M. Essaaidi

4th International Conference on Control, Decision and Information Technologies, April 5-7, 2017, Barcelona, Spain

An Energy-Efficient Approach for Controlling Heating and Air-Conditioning Systems

F. Lachhab, R. Ouladsine, M. Bakhouya, M. Essaaidi

5th International on Renewable and Sustainable Energy Conference (IRSEC), Tangier, Morocco, 4-7 December, 2017

Study and Design of Hybrid Wind-Photovoltaic System for Medium Scale Mechanical Vapor Compression Desalination Unit for Two Different Sites in Morocco

M. Ghazi, E. Essadiqi, M. Faqir, M. Mada, A. Ben Abdellah

Proceedings of 2017 International Renewable and Sustainable Energy Conference, IRSEC 2017

Seawater Desalination Pilot Plant: Optimal Design and Sizing of Solar Driven-Four Effect Evaporators Combined with Heat Integration Analysis

M. Ghazi, E. Essadiqi, M. Mada, M. Faqir, A. Benabdellah

Modelling and Simulations, 177

A Novel RFID System for Monitoring Livestock Health State

H. Bouazza, M. Bouya

International Conference on Engineering and Technology, IEEE ICET 2017, Akdeniz University, Antalya, Turkey, 21-23 August 2017

Optimizing and Controlling the Productivity of a Flat Plate Collector by Using an Electronic System

K. Anoune, M. Bouya, A. Ben Abdellah, A. Astito

Energy Procedia, vol. 107, 2017, Pages 180-187

Sun tracking based on hybrid control with high accuracy and low consumption

M. Belkasmi, K. Bouziane, M. Akherraz, M. Elouahabi

International Review of Automatic Control (I.RE.A.CO.), Vol. 10, N. 6 ISSN 1974-6059, 2017

Thermal analysis and economic study of new pilot solar driven desalination unit using mechanical vapour compression process with zero pollution

M. Ghazi, E. Essadiqi, M. Mada, M. Faqir, A. Benabdellah

Three Possible Configurations of Solar Thermal System Used for Four Effect MED Seawater Desalination Pilot Unit- Comparison and selection

M. Ghazi, E. Essadiqi, M. Mada, M. Faqir, A. Benabdellah

Hybrid Wind-PV System for Medium Scale MVC Desalination Unit: Study and Design for Two Different Sites in Morocco

M. Ghazi, M. Faqir, E. Essadiqi, M. Mada, A. B. Abdellah

International Renewable and Sustainable Energy Conference (IRSEC’17), 2017

University-Based Smart Cities: from collective intelligence to smart crowd-conscience

M. Makkaoui, F. Lachhab, M. Bakhouya

The Journal of Quality in Education, 7(9)

The PV Corrosion Fault Prognosis Based on Ensemble Kalman Filter

R. Ouladsine, R. Outbib, M. Bakhouya

Modeling and Dimensioning of Grid-connected PV systems

S. Boulmrharj, R. Rabeh, V. Felix, R. Ouladsine, M. Bakhouya, K. Zine-dine, M. Khaidar, M. Siniti, R. Abid

International Renewable and Sustainable Energy Conference, IRSEC’2017, IEEE, Tanger, Morocco

Review of savonius wind turbine design and performance

M. Zemamou, M. Aggour, A. Toumi

Energy Procedia, 2017

Investigation du système de dessalement par humidification-déshumidification

A. El Maakoul, A. Ben Abdellah, S. Saadeddine, M. Meziane, A. Laknizi

Revue de l’entrepreneuriat et de l’innovation, vol. 1, no. 1, 2016

Utilisation d’un échangeur air-sol comme solution de conditionnement d’air dans un bâtiment avicole

A. Laknizi, A. El Maakoul, A. Ben Abdellah, S. Saadeddine, M. Meziane

Revue de l’entrepreneuriat et de l’innovation, vol. 1, no. 1, 2016

Mitigating the effect of heat and dust to enhance solar panels efficiency

S. P. Aly, N. Barth, B. Figgis, E. Essadiqi, M. Faqir, A. Ennaoui, S. Ahzi

International Renewable and Sustainable Energy Conference (IRSEC), 2016 International, p. 835-841, IEEE

Modeling and simulation of a C3MJ+ triple junction solar cell using Matlab/Simulink

M. K. Anaty, M. Belkasmi, K. Bouziane, M. Aggour, M. El Ouahabi

International Renewable and Sustainable Energy Conference (IRSEC), 2016 International, p. 752-757, IEEE

Hybrid renewable energy system to maximize the electrical power production

K. Anoune, M. Bouya, M. Ghazouani, A. Astito, A. Ben Abdellah

International Renewable and Sustainable Energy Conference (IRSEC), 2016 International, p. 533-539, IEEE

Numerical simulation of photovoltaic panel thermal condition under wind convection

H. Assila, E. Essadiqi, M. Faqir, M. Meziane, M. F. Ghanameh, S. Ahzi

International Renewable and Sustainable Energy Conference (IRSEC), 2016 International, p. 653-658, IEEE

Study of the performance of a high concentrator photovoltaic module using three prediction models

M. Belkasmi, M. K. Anaty, K. Bouziane, M. Akherraz, M. Elouahabi, T. Sadiki, M. Faqir

International Renewable and Sustainable Energy Conference (IRSEC), 2016 International, p. 243-248, IEEE

Analytical and finite element modeling of through glass via thermal stress

A. Benali, M. Faqir, M. Bouya, A. Benabdellah, M. Ghogho

Microelectronic Engineering, 151, 12-18

New and low cost product solution for LED matrix display

H. Bouazza, M. Bouya, A. Hadjoudja

International Conference on Engineering & MIS - ICEMIS 2016

Soot quantification during bio-oil thermal conversion

Y. Chhiti, R. Ouladsine, M. Kemiha, M. Bensitel

Journal of Materials and Enviromental Science, vol. 7, no. 6

Catalytic effect of ash on bio-oil thermal conversion

Y. Chhiti, R. Ouladsine, A. Sahibeddine, M. Bensitel

Moroccan Journal of Chemistry, 4(2), 584-591

An alternative to heat transfer coefficient: A relevant model of heat transfer between a developed fluid flow and a non-isothermal wall in the transient regime

A. Degiovanni, B. Remy

International Journal of Thermal Sciences, 102, 62-77

Reliability of Copper-Plated Through-Package-Via (TPV) in Glass Packages with in-situ stress measurements using Raman spectroscopy

K. Demir, A. Benali, V. Sundaram, P. M. Raj, R. Tummala

Electronic Components and Technology Conference (ECTC), 2016 IEEE 66th (p. 799-805), IEEE

Fabrication, assembly and testing of a glass interposer-based 3D systems in package

A. El Amrani, K. Demir, M. Bouya, M. Faqir, A. Hadjoudja, M. Ghogho

Microelectronic Engineering, 165, 6-10

Numerical comparison of shell-side performance for shell and tube heat exchangers with trefoil-hole, helical and segmental baffles

A. El Maakoul, A. Laknizi, S. Saadeddine, M. El Metoui, A. Zaite, M. Meziane, A. Ben Abdellah

Applied Thermal Engineering, 109, p. 175-185

A passive guard for low thermal conductivity measurement of small samples by the hot plate method

Y. Jannot, A. Degiovanni, V. Grigorova-Moutiers, J. Godefroy

Measurement Science and Technology, 28(1), 015008

Performance evaluation of CEP engines for stream data processing

F. Lachhab, M. Bakhouya, R. Ouladsine, M. Essaaidi

2nd International Conference on Cloud Computing Technologies and Applications (CloudTech), p. 64-69, IEEE

Evaluation of a domestic hybrid solar air conditioner system under various climate conditions

A. Laknizi, M. Bouya, A. Ben Abdellah, A. El Maakoul, S. Dhimdi, S. Saadeddine

International Renewable and Sustainable Energy Conference (IRSEC), 2016, pp. 294-298, IEEE

Introduction to the effect of the screening phenomenon of slip bands within grain microstructure

M. Ould Moussa, M. Sauzay

Procedia Structural Integrity, 2, 1692-1699

Filtering techniques for the system prognosis

R. Ouladsine, R. Outbib, Y. Chhiti

5th International Conference on Systems and Control (ICSC), p. 283-287, IEEE

A Steady-state and transient microscale temperature measurements by multispectral method and photons counting

T. Pierre, C. Rodiet, B. Rémy, A. Degiovanni

Applied Thermal Engineering, 99, p. 343-351

A Middleware Architecture for RFID-enabled traceability of air baggage

T. Bouhouche, A. Raghib, B. Abou El Majd, M. Bouya, M. Boulmalf

IEEE Xplore Digital Library and Proceeding of the 5th International Conference on Multimedia Computing and Systems (ICMCS 14), Marrakech, Morocco, 29 September - 1 October 2016

Optimal wavelengths obtained from laws analogous to the Wien’s law for monospectral and bispectral methods, and general methodology for multispectral temperature measurements taking into account global transfer function including non-uniform emissivity of surfaces

C. Rodiet, B. Remy, A. Degiovanni

Infrared Physics & Technology, April 2016

Energy improvement of the FPC thermal collector using a mono-axial tracker

K. Anoune, M. Ghazouani, M. Bouya, A. Astito, A. Ben Abdellah

3rd International Renewable and Sustainable Energy Conference (IRSEC, 2015)

New Design and Architecture of a Smart Tracker: Flexible and Scalable for PV and CSP systems

K. Anoune, M. Bouya, A. Ben Abdellah

Journal of Energy and Power engineering, 9(3)

Magnetic structure of Mn-doped 6H-SiC

M. Al Azri, M. Elzain, K. Bouziane, S. M. Chérif

Journal of Physics: Conference Series, 2015

Spin-state dependence of electrical resistivity and thermoelectric power of molten Al-Mn alloys: Experiment and theory

A. Ben Abdellah, B. Grosdidier, S. M. Osman, S. M. Rahman, M. Mayoufi, J. Ataati, J. G. Gasser

Journal of Alloys and Compounds, vol. 658, p. 1010-1019

Solar Heater Technologies Selection Using Multi-criteria Analysis

M. Bouya, B. A. El Majd, M. Agdid, A. Ben Abdellah

Journal of Energy and Power Engineering, 9(4), 393-398

Mn fraction substitutional site and defects induced magnetism in Mn-implanted 6H-SiC

K. Bouziane, M. Al Azri, M. Elzain, S. M. Chérif, M. Mamor, A. Declémy, L. Thomé

Journal of Alloys and Compounds, 632, 760-765

Modeling and design of heat exchangers in a solar-multi effect distillation plant

A. Chorak, A. El Maakoul, A. Laknizi, A. Ben Abdellah, E. Essadiqi

3rd International Renewable and Sustainable Energy Conference (IRSEC), p. 1-6, IEEE, December 2015

Numerical and experimental analysis of municipal solid wastes gasification process

N. Couto, V. Silva, E. Monteiro, S. Teixeira, R. Chacartegui, K. Bouziane, P. S. D. Brito, A. Rouboa

Applied Thermal Engineering, 78, p. 185-195

A new quadrupole model of the transient hot strip method for thermal conductivity measurement

T. Ding, Y. Jannot, A. Degiovanni, M. Weber, J. Ouhajjou

High Temperatures - High Pressures, 44 (3), p. 187-209

Electrical performance of glass interposer-based 3D packaging: modeling and simulations

A. El Amrani, M. El Bouhali, M. Bouya, A. Benali, M. Faqir, A. Hadjoudja, M. Ghogho

International Conference on Electrical and Information Technologies (ICEIT), p. 016-019, IEEE, March 2015

α-Na2Ni2Fe(PO4)3: A dual positive/negative electrode material for sodium ion batteries

R. Essehli, I. Belharouak, H. Ben Yahia, R. Chamoun, B. Orayech, B. El Bali, K. Bouziane, X. L. Zhou, Z. Zhou

Dalton Transactions, 44 (10), p. 4526-4532

Steady-state analysis of four effects evaporation desalination process using thermal solar energy

M. Ghazi, M. Faqir, E. Essadiqi, M. Mada, A. Ben Abdellah

3rd International Renewable and Sustainable Energy Conference (IRSEC), p. 1-6, IEEE, December 2015

A new methodology to select the thermal solar collectors by localizations and applications

M. Ghazouani, M. Bouya, M. Benaissa

3rd International Renewable and Sustainable Energy Conference (IRSEC), p. 1-5, IEEE, December 2015

Chemical short range order and magnetic correction in liquid manganese–gallium zero alloy

B. Grosdidier, A. Ben Abdellah, S. M. Osman, J. Ataati, J. G. Gasser

Physica B: Condensed Matter, 479, 79-84

A state-feedback approach for controlling ventilation systems in energy efficient buildings

F. Lachhab, M. Essaaidi, M. Bakhouya, R. Ouladsine

3rd International Renewable and Sustainable Energy Conference (IRSEC), p. 1-6, IEEE, December 2015

Evaluation of earth-air heat exchanger for cooling and heating a poultry house: case study in Morocco

A. Laknizi, A. El Maakoul, A. Ben Abdellah, M. Bouya, S. Dhimdi, S. Said

3rd International Renewable and Sustainable Energy Conference (IRSEC), p. 1-5, IEEE, December 2015

MarUnivCloud: Towards a Moroccan inter-University Cloud

M. Belkasmi, K. Bouziane, M. Akherraz, T. Sadiki, M. Faqir, M. Elouahabi

3rd International Renewable and Sustainable Energy Conference (IRSEC), 2015

Improved dual-axis tracker using a fuzzy-logic based controller

M. Ghazouani, M. Bouya, and M. Benaissa

3rd International Renewable and Sustainable Energy Conference (IRSEC), 2015

Prognosis of Systems with Stochastic Inputs

R. Ouladsine, R. Outbib

IFAC-PapersOnLine, 48(21), 1327-1332

Influence of measurement noise and number of wavelengths on the temperature measurement of opaque surface with variable emissivity by a multi-spectral method based on the flux ratio in the infrared-ultraviolet range

C. Rodiet, B. Remy, T. Pierre, A. Degiovanni

High Temperatures - High Pressures, 44(3), p. 211-226

Spin Torque Oscillator for High Performance Magnetic Memory

R. Sbiaa, K. Bouziane

Sultan Qaboos University Journal for Science [SQUJS], 20(1), 77-82

The effect of deformation twinning on stress localization in a three dimensional TWIP steel microstructure

V. Tari, A. D. Rollett, H. E. Kadiri, H. Beladi, A. L. Oppedal, R. L. King

Modelling and Simulation in Materials Science and Engineering, 2015

The Effect of Annealing Conditions and Alloying Elements on the Microstructure Stability and Mechanical Properties of Mg-Zn-Cesheets

M. Aljarrah, E. Essadiqi, R. H. Fouad, M. Rababah, A. Almagableh

Applied Mechanics and Materials, vol. 472, pp. 937-947, Trans Tech Publications

Convexity of the Set of k-Admissible Functions on a Compact Kähler Manifold

A. Jbilou

International Journal of Innovation and Scientific Research, vol. 4, no. 1, pp. 42–46, July 2014

Twinning and Tripping in 10% Mn steels

H. Aydin, I. H. Jung, E. Essadiqi, S. Yue

Materials Science and Engineering: A, 591, 90-96

Annealing effect on the structural and magnetic properties of MN-implanted 6h-sic

M. Al Azri, K. Bouziane, M. Elzain, S. M. Chérif, A. Declémy, L. Thomé, M. Viret

IEEE Transactions on Magnetics, 50 (11), art. No. 6971661

Extension and optimization of a three-layer method for the estimation of thermal conductivity of super-insulating materials

S. A. Bahrani, Y. Jannot, A. Degiovanni

Journal of Applied Physics, 116(14), 143509

Optimization of a solar tracker for CPV system principles and practical approach

M. Belkasmi, K. Bouziane, M. Akherraz, T. Sadiki

International Renewable and Sustainable Energy Conference (IRSEC), p. 169-174, IEEE, October 2014

Mapping of solar water heating systems technologies in Morocco

M. Bouya, M. Agdid, A. Ben Abdellah

International Renewable and Sustainable Energy Conference (IRSEC), p. 716-719, IEEE, October 2014

The Smart and Autonomous Stand-Alone Speed Limit Road Sign According to the Weather Changes

M. Bouya, T. Laghmichi, O. Zerouri, A. Ben Abdellah

International Journal of Engineering and Mathematical Modeling, vol. 1, no. 1

Numerical evaluation of heat transfer in corrugated heat exchangers

A. Chorak, E. Ihringer, A. Ben Abdellah, S. Dhimdi, E. Essadiqi, M. Bouya, M. Faqir

International Renewable and Sustainable Energy Conference (IRSEC), p. 401-406, IEEE, October 2014

L’utilisation des déchets solides avec du sable pour le traitement des eaux usées de la zone industrielle de la ville de Tanger

E. Essadiqi

L’Eau, l’industrie, les nuisances, vol. 389, p. 83, 2014

A study of through package vias in a glass interposer for multifunctional and miniaturized systems

A. El Amrani, A. Benali, M. Bouya, M. Faqir, K. Demir, A. Hadjoudja, M. Ghogho

Microelectronics Reliability, 54(9-10), 1972-1976

Simulation of low-velocity impacts on laminated glass

M. F. Ghanameh

Damascus University Journal for engineering sciences, 2014

Influence of cooling rate on microsegregation behavior of magnesium alloys

M. Khan, A. O. Mostafa, M. Aljarrah, E. Essadiqi, M. Medraj

Journal of Materials, 2014

Rétention des métaux lourds des eaux de refroidissement industrielles par filtration percolation á travers des matrices filtrantes naturelles

A. Laamyem, A. Ben Abdellah, E. Essadiqi, M. Faqir, M. Bouya

L’Eau, l’industrie, les nuisances, no. 373, p. 91, 2014

Filtration et réutilisation des rejets liquides des machines à laver par infiltration percolation à travers la matrice sable cendre

A. Laamyem, A. Ben Abdellah, E. Essadiqi, M. Faqir, M. Bouya

Eau, l’Industrie, les Nuisances, no. 374, p. 100, 2014

L’efficacité, Energétique: Une réalité d’aujourd’hui

M. Bouya

La Revue Industrie du Maroc, vol. 20, pp. 62–63, 2014

On the electrical characteristics of Au/n-type GaAs Schottky diode

M. Mamor, K. Bouziane, A. Tirbiyine, H. Alhamrashdi

Superlattices and Microstructures, vol. 72, p. 344-351, 2014

Barrier inhomogeneities in titanium Schottky contacts formed on argon plasma etched p-type Si 0.95 Ge 0.05

M. Mamor, K. Bouziane, A. Tirbiyine

Journal of Materials Science: Materials in Electronics, 25(3), 1527-1533

The evolution of as-cast microstructure of ternary Mg-Al-Zn alloys: an experimental and modeling study

M. Paliwal, D. H. Kang, E. Essadiqi, I. H. Jung

Metallurgical and Materials Transactions A, 45(8), 3596-3608

Variations of microsegregation and second phase fraction of binary Mg-Al alloys with solidification parameters

M. Paliwal, D. H. Kang, E. Essadiqi, I. H. Jung

Metallurgical and Materials Transactions A, 45(8), 3308-3320

Theoretical study of the limits of the 3ω method using a new complete quadrupole model

T. Ding, Y. Jannot, A. Degiovanni

International Journal of Thermal Sciences, December 2014

Glass interposer reliability improvement by transient thermal modelling and physical analysis

A. Benali, A. El Amrani, Y. Bouissa, M. Bouya, M. Faqir, Y. Benlahoucine

Proceedings from the 39th International Symposium for Testing and Failure Analysis (ISTFA), 2013

Thermal and thermo-mechanical performances of glass interposer in 3D packaging systems

A. El Amrani, M. Bouya, Y. Bouissa, A. Benali, M. Faqir, M. Ghogho, A. Hadjoudja, L. Hlou

20th IEEE International Symposium on the in Physical and Failure Analysis of Integrated Circuits (IPFA), 2013

First principle calculation of the electronic and magnetic properties of Mn-doped 6H-SiC

M. Al Azri, M. Elzain, K. Bouziane, S. M. Chérif

The European Physical Journal B, 86(9), 402

Model for Mn in 6H-SiC from first-principle studies

M. Al Azri, M. Elzain, K. Bouziane, S. M. Cherif, A. Declémy, L. Thomé

Journal of Applied Physics, 113(17), 17C305

Development of 3rd generation AHSS with medium Mn content alloying compositions

H. Aydin, E. Essadiqi, I. H. Jung, S. Yue

Materials Science and Engineering: A, 564, 501-508

Effect of intercritical heat treatment on the microstructure and mechanical properties of medium Mn steels

H. Aydin, E. Essadiqi, I. H. Jung, S. Yue

ISIJ international, 53(10), 1871-1880

Through glass via thermomechanical analysis: geometrical parameters effect on thermal stress

A. Benali, M. Bouya, M. Faqir, A. El Amrani, M. Ghogho, A. Benabdellah

8th IEEE Design and Test Symposium (IDT), p. 1-5, December 2013

Magnetization reversal and spin waves in cobalt nanocylinders electrodeposited into nanoporous alumina template

K. Bouziane, Y. Roussigné, S. M. Chérif, A. A. Stashkevich, M. Vasquez, M. R. Britel, M. Cherkaoui

Sensor letters, 11(12), 2282-2286

Influence of the biomass gasification processes on the final composition of syngas

N. Couto, A. Rouboa, V. Silva, E. Monteiro, K. Bouziane

Energy Procedia, 36, pp. 596-606

Evaluation of Surface Roughness of Implant Abutments Treated with Three Scaling Methods

E. E. Saracbi, M. M. Al-Sabaag, M. F. Ghanameh

Al Baath University Journal for medical sciences, 2013

Reliability Assessment of a New Power Electronics Packaging Material: Silver Diamond Composite

M. Faqir, J. W. Pomeroy, T. Batten, T. Mrotzek, S. Knippscheer, O. Vendier, S. Rochette, M. Massiot, L. Letteron, J. M. Desmarres, F. Courtade

Journal of Microelectronics and Electronic Packaging, 10(2), p. 54-58

Spin treatment approach of electronic transport in magnetic liquid transition metals

B. Grosdidier A. Ben Abdellah, K. Bouziane, S. M. Mujibur Rahman, J. G. Gasser

Philosophical Magazine, vol. 93, p. 3576–3588, 2013

On the precipitates and mechanical properties of magnesium–yttrium sheets

M. Aljarrah, E. Essadiqi

Alexandria Engineering Journal, Volume 52, Issue 2, 2013, Pages 221-225

Liquid gallium-lead mixture phase diagram, surface tension near the critical mixing point, and prewetting transition

S. M. Osman, B. Grosdidier, I. Ali, A. Ben Abdellah

Physical Review E - Statistical, Nonlinear, and Soft Matter Physics, 2013

Microstructural modeling of Mg alloys and experimental validation

M. Paliwal, Y. B. Kang, E. Essadiqi, I. H. Jung

Materials Science Forum, vol. 765, p. 185-189, Trans Tech Publications

A texture and microstructure analysis of high speed rolling of AZ31 using split Hopkinson pressure bar results

M. Sanjari, A. Farzadfar, T. Sakai, H. Utsunomiya, E. Essadiqi, I. H. Jung, S. Yue

Journal of materials science, 48(19), 6656-6672

The Texture and Microstructure Evolution of Mg-Zn-Ce Alloys

M. Sanjari, A. Farzadfar, T. Sakai, H. Utsunomiya, E. Essadiqi, I. H. Jung, S. Yue

Magnesium Technology 2013 (pp. 101-106). Springer, Cham

Microstructure and texture evolution of Mg3Zn3Ce magnesium alloys sheets and associated restoration mechanisms during annealing

M. Sanjari, S. F. Farzadfar, T. Sakai, H. Utsunomiya, E. Essadiqi, I. H. Jung, S. Yue

Materials Science and Engineering: A, 561, 191-202

Characterization of Isothermally Heat-Treated High Carbon Nanobainitic Steels

G. Sidhu, S. D. Bhole, E. Essadiqi, D. L. Chen

Journal of materials engineering and performance, 22(10), 3070-3076

Magnetic properties of Mn-implanted 6H-SiC single crystal

M. Al Azri, M. Elzain, K. Bouziane, S. M. Chérif, Y. Roussigné, A. Declemy, M. Drouet, L. Thomé

Journal of Applied Physics, 111(7), 07C315

The influence of micro-alloying and cooling rate on microstructure of hot rolled and annealed AZ31 sheet

M. Aljarrah, E. Essadiqi

International Review of Mechanical Engineering, vol. 6, no. 6, 2012

Hot deformation characteristics of a 18Mn-0.8Si-0.55C TWIP steel

J. Calvo, S. Yue, E. Essadiqi, J. M. Cabrera

4th International Conference on Thermomechanical Processing of Steels, TMP 2012

Improved thermal management for GaN power electronics: Silver diamond composite packages

M. Faqir, T. Batten, T. Mrotzek, S. Knippscheer, M. Massiot, M. Buchta, H. Blanck, S. Rochette, O. Vendier, M. Kuball

Microelectronics Reliability, 52(12), p.3022-3025

Complex Hessian equations on some compact Kähler manifolds

A. Jbilou

International Journal of Mathematics and Mathematical Sciences, 2012, art. No. 350183

Thermal and thermo-mechanical performances of glass interposer in 3D packaging systems

M. Faqir, M. Bouya, Y. Bouissa, A. Elamrani, Z. Sbiaa, S. Gandhi, K. Demir, V. Sundaram, R. Tummala

Proceeding of the 38th International Symposium for Testing and Failure Analysis (ISTFA 2012)

Infrared Thermography Developments for Ill-V Transistors and MMlCs

D. Carisetti, M. Bouya, O. Bezencenet, B. Servet, J. C. Clément, B. Lambert, L. Caille

Proceedings of the 37th International Symposium for Testing and Failure Analysis: November 13-17, 2011, San Jose Convention Center, San Jose, California, USA (p. 230), ASM International

New GaN Power-Electronics Packaging Solutions: A Thermal Analysis Using Raman Thermography

M. Faqir, A. Manoi, T. Mrotzek, S. Knippscheer, M. Massiot, M. Buchta, H. Blanck, S. Rochette, O. Vendier, M. Kuball

Journal of Microelectronics and Electronic Packaging, 8(3), 110-113

Effect of different finishing: polishing systems on the surface roughness of two heat-treated composite resins

O. Yassin, M. F. Ghanameh

Materials Research, 14(2), 142-145